What Kind of Oil Does My Ford F-150 Take?

Full Fluid Breakdown for the Ford F-150 from Northtown Ford of Yankton

What Kind of Oil Does My Ford F-150 Take? Full Fluid Breakdown for the Ford F-150

Standing in the parts aisle, staring at a wall of bottles and wondering which one your truck actually needs? It’s a question our service team at Northtown Ford in Yankton hears often. The right F-150 oil type depends on your model year and engine, and the same goes for nearly every other fluid.

What Oil Type Does a Ford F-150 Need?

Turbocharged EcoBoost engines and the PowerBoost hybrid call for SAE 5W-30. Many naturally aspirated engines, including the 3.3L V6 and the 2015–2020 5.0L V8, specify SAE 5W-20 instead.

The “5W” rating describes how easily oil flows at cold start, and the second number reflects its viscosity once the engine is warm. Turbos run hot, which is part of why EcoBoost engines tend to run on 5W-30. The 2018 F-150 oil type is a good example of how much the engine matters: that year, the 2.7L and 3.5L EcoBoost took a 5W-30 synthetic blend, the 3.3L V6 and 5.0L V8 took a 5W-20 synthetic blend, and the 3.0L Power Stroke diesel required a diesel-specific 5W-30. Also check the bottle for the Ford specification number listed in your manual.

2026 Ford F-150

F-150 Oil by Engine and Model Year

Engine Model Years Oil Viscosity Capacity (with filter)
2.7L EcoBoost V6 2015+ SAE 5W-30 6.0 qt (5.7 L)
3.5L EcoBoost V6 2015+ SAE 5W-30 6.0 qt (5.7 L)
3.5L PowerBoost Hybrid 2021+ SAE 5W-30 6.0 qt (5.7 L)
3.3L V6 2018–2023 SAE 5W-20 6.0 qt (5.7 L)
5.0L Coyote V8 2015–2017 SAE 5W-20 7.7 qt (7.3 L)
5.0L Coyote V8 2018–2020 SAE 5W-20 8.8 qt (8.3 L)
5.0L Coyote V8 2021+ SAE 5W-30 7.75 qt (7.33 L)

How Much Oil Does Each F-150 Engine Hold?

Most F-150 engines, including both EcoBoost V6s and the PowerBoost hybrid, hold 6.0 quarts with a filter change. The 5.0L V8 holds more, and its capacity varies by model year.

The 3.5L EcoBoost oil capacity and the 2.7L EcoBoost oil capacity are both listed at 6.0 quarts (5.7 liters). The 5.0L Coyote oil capacity is trickier. It’s 7.7 quarts for 2015–2017, 8.8 quarts for 2018–2020 after the engine was updated, and 7.75 quarts on 2021 and newer trucks. Overfilling is a problem, too. Too much oil can be churned into foam by the crankshaft, reducing its ability to protect moving parts. A smart habit is to add slightly less than the listed amount, run the engine briefly, then check the dipstick and top off as needed.

Ford F-150 Pickup Truck

What Happens If You Use the Wrong Oil?

The wrong oil usually won’t ruin an engine overnight, but it can lead to longer cranking times, reduced performance, lower fuel economy, and increased wear over time. It can also complicate a warranty claim.

Viscosity matters because modern F-150 engines use oil pressure to run variable cam timing. Oil that’s too thin may not withstand the heat of towing a camper to Lewis and Clark Lake. Oil that’s too thick flows slowly on a below-zero South Dakota morning. Ford’s owner’s manuals also note that oil that does not meet its specifications could cause engine damage that may not be covered by the vehicle warranty. Staying on top of your F-150 oil change interval matters just as much. Newer trucks use the Intelligent Oil-Life Monitor, which adjusts its reminders based on how the truck is driven. Towing, extended idling, short trips, and dusty gravel roads count as harder use and can bring the next oil change sooner.

Ford F-150 Towing and Performance

The Rest of the F-150 Fluid Breakdown

Transmission Fluid

The F-150 transmission fluid type depends on the gearbox. The 10-speed 10R80 automatic, standard on most 2018 and newer F-150s, uses Motorcraft Mercon ULV only. Older 6-speed 6R80 transmissions use Mercon LV. The two aren’t interchangeable, so mixing them up can be a costly mistake.

Coolant

The F-150 coolant type changed with the 2020 model year. Earlier trucks generally use Motorcraft Orange, while 2020 and newer trucks use Motorcraft Yellow. They’re different chemistries, so don’t top off one with the other.

Differential and Transfer Case Fluid

Ford specifies Motorcraft SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant as the F-150 differential fluid on many late-model trucks, though some heavy-duty towing setups call for 75W-140. Transfer case fluid varies by year and case design, so confirm it in your owner’s manual.

Brake Fluid

For F-150 brake fluid, Ford recommends Motorcraft DOT 4 LV High Performance Motor Vehicle Brake Fluid or an equivalent that meets Ford’s specification.

Keeping Your F-150 on the Right Oil and Fluids

Whether there’s an EcoBoost, a PowerBoost, or a Coyote V8 under the hood, using the correct F-150 oil type and fluids keeps your truck running the way Ford designed it to. Start with your oil fill cap and owner’s manual, and when in doubt, the service team at Northtown Ford in Yankton can confirm exactly what your truck needs.

Due for an oil change or fluid service? Schedule an appointment with Northtown Ford, or contact our dealership with questions about your F-150’s maintenance.

Frequently Asked Questions

What kind of oil does a Ford F-150 take?

It depends on the model year and engine. EcoBoost engines and the PowerBoost hybrid use SAE 5W-30, many earlier naturally aspirated engines use 5W-20, and the 5.0L V8 switched to 5W-30 starting with 2021 models.

How much oil does the 3.5L EcoBoost hold?

The 3.5L EcoBoost holds 6.0 quarts (5.7 liters) of SAE 5W-30 with a filter change.

How much oil does the 2.7L EcoBoost take?

The 2.7L EcoBoost also takes 6.0 quarts (5.7 liters) of SAE 5W-30 with a filter change.

How much oil does the 5.0L V8 hold, and did it change by year?

Yes, it changed. The 5.0L holds 7.7 quarts for 2015–2017, 8.8 quarts for 2018–2020, and 7.75 quarts for 2021 and newer, so confirm your year in the owner’s manual.

Does the F-150 need full synthetic oil?

The F-150 needs oil that meets the Ford specification listed in your owner’s manual, and many model years specify a synthetic blend. A full synthetic that meets the same specification and viscosity is also acceptable.

How often should I change the oil in my F-150, especially if I tow?

Follow the Intelligent Oil-Life Monitor on newer trucks. Towing and other severe conditions typically shorten the interval, so check the special operating conditions schedule in your owner’s manual.

What transmission fluid does the 10-speed F-150 use?

The 10-speed 10R80 automatic uses Motorcraft Mercon ULV automatic transmission fluid.

Can I use Mercon LV instead of Mercon ULV?

No. Mercon ULV is a lower-viscosity fluid, and the two aren’t interchangeable, so using the wrong one can affect shifting and potentially damage the transmission.

What type of coolant does the F-150 use?

F-150s through the 2019 model year generally use Motorcraft Orange, and 2020 and newer models use Motorcraft Yellow. Don’t mix the two.

What fluid goes in the F-150 rear differential and transfer case?

Many late-model F-150 rear axles use Motorcraft SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant, while some heavy-duty towing setups use 75W-140. Transfer case fluid varies by year and case design, so check your owner’s manual.

What brake fluid does the F-150 take?

Ford recommends Motorcraft DOT 4 LV High Performance Motor Vehicle Brake Fluid or an equivalent that meets Ford’s specification.

Does the PowerBoost hybrid use the same oil?

Yes. The 3.5L PowerBoost uses SAE 5W-30 and holds 6.0 quarts with a filter change, the same as the 3.5L EcoBoost.

Contact Northtown Ford of Yankton

Send us a message or stop by. We serve drivers from Yankton and the surrounding communities.

Send Us a Message

Contact Us

Call Us

Visit Our Dealership

Northtown Ford of Yankton
316 Capital Street, Yankton, SD 57078
Get Directions

Hours

Monday 8:00AM - 6:00PM
Tuesday 8:00AM - 6:00PM
Wednesday 8:00AM - 6:00PM
Thursday 8:00AM - 6:00PM
Friday 8:00AM - 6:00PM
Saturday 8:00AM - 4:00PM
Sunday Closed
Monday 8:00AM - 5:30PM
Tuesday 8:00AM - 5:30PM
Wednesday 8:00AM - 5:30PM
Thursday 8:00AM - 5:30PM
Friday 8:00AM - 5:30PM
Saturday 8:00AM - 4:00PM
Sunday Closed
Monday 7:30AM - 6:00PM
Tuesday 7:30AM - 6:00PM
Wednesday 7:30AM - 6:00PM
Thursday 7:30AM - 6:00PM
Friday 7:30AM - 6:00PM
Saturday 8:00AM - 3:00PM
Sunday 10:00AM - 6:00PM